Settings
About
Parameter | Description |
---|---|
Device Name | This field displays the name of the SEM Bridge. You define the name during the initial setup, but you can change the name at any time. |
Firmware Version | This field displays the version of firmware that is installed on the SEM Bridge. |
Model | This field displays the hardware designation of the SEM Bridge. |
Serial | This field displays the serial number of the SEM Bridge. |
Network Setup
Parameter | Description |
---|---|
Configure IP automatically | Select this option to use an automatic IP address. |
Manually configure IP | Select this parameter to manually set the IP configuration for the SEM Bridge. If you select to manually set the IP configuration, you can edit the IP Address, Subnet Mask, Default Gateway, and DNS Server fields. |
IP Address | This field displays the IP address of the SEM Bridge. If you select to manually set the IP configuration, you can edit this field. |
Subnet Mask | This field displays the subnet mask for the SEM Bridge. If you select to manually set the IP configuration, you can edit this field. |
Default Gateway | This field displays the default gateway for the SEM Bridge. If you select to manually set the IP configuration, you can edit this field. |
DNS Server | This field displays the address of the DNS server for the SEM Bridge. If you select to manually set the IP configuration, you can edit this field. |
Security
Parameter | Description |
---|---|
Username | This field displays the user name for the account that is logged into the SEM Bridge. |
Password | Use this field to define a new password for the account. |
Confirm Password | Use this field to confirm the password for the account. |
Server Time
Parameter | Description |
---|---|
Time Zone | Select the time zone in which the SEM Bridge operates. |
Synchronize with NTP server(s) | Select this parameter to synchronize the date and time on the SEM Bridge with an NTP server. |
Set Manually | Select this parameter to manually set the date and time on the SEM Bridge. |
Use default NTP servers | Select this parameter to use the default NTP servers to set the date and time on the SEM Bridge. |
Set manually | Select this parameter to manually set the date and time on the SEM Bridge. |
Date | Set the date for the SEM Bridge. If you select to manually set the date and time, you can edit this field. |
Time | Set the time for the SEM Bridge. If you select to manually set the date and time, you can edit this field. |
Management
Parameter | Description |
---|---|
Enable Proxy | Select this option to use a proxy with the SEM Bridge. |
Organization Name | This field displays the name of the organization in Enterprise Manager to which the SEM Bridge belongs. |
Address | This field displays the address of Enterprise Manager. |
Passphrase | This field contains the passphrase that devices use to connect to Enterprise Manager. |
Proxy Address | Type the address for the proxy server. If you select Enable Proxy, you can edit this field. |
Proxy Port | Type the port for the proxy server. If you select Enable Proxy, you can edit this field. |
Proxy Username | Type the user name that the SEM Bridge uses for the proxy server. If you select Enable Proxy, you can edit this field. |
Proxy Password | Type the password that the SEM Bridge uses for the proxy server. If you select Enable Proxy, you can edit this field. |