Home
Configuration
Configure the SEM Bridge device using the Settings page or running the Setup Wizard.
Restore factory settings

Introduction
The SEM Bridge device is a hardware device that connects network cameras to Enterprise Manager.
Configuration
Configure the SEM Bridge device using the Settings page or running the Setup Wizard.
- Configure the SEM Bridge device
  You can configure the SEM Bridge device manually (rather than using the setup wizard) in the SEM Bridge Web interface.
- Add a camera automatically
- Add a camera manually
- Restart the SEM Bridge device
- Restore factory settings
- Download logs
- Add a network connection
  You can add a second network connection using a USB network adapter.
Update
You can update both the SEM Bridge firmware and the firmware for cameras attached to the SEM Bridge device.
Legal information
Copyright © 2018 Senstar Corporation and/or its Licensor(s). All rights reserved.

Restore factory settings

In the SEM Bridge Web interface, click Settings.
Click Restore.
To confirm the restoration of factory settings, click OK.

© Senstar Corporation