Integrating to Video Insight Monitor Station VMS This was tested against Monitor Station v6.2.8.5

1. Windows Firewall – check to make sure it’s turn off or create Inbound/Outbound Rules to allow both TCP ports 4010 (data)/4012 (command)
2. Add the Video Insight driver
• Launch Symphony AC > Hardware Manager. In the Command toolbar unlock the module. Also in the Command toolbar, click on the Commands button> Edit > Add Driver
•  In the Add Driver window, expand DVR/NVR Video Drivers and select Video Insight Drivers
3. Add the Video Insight controller and Configuration
• Right-click the newly added driver> Edit >  Controller
• In the Add Controller window, Manual Setup, click OK
• Click on the Video Insight controller you just added > Properties
• In the IP_Address field – Enter the IP address of the Video Insight Monitor Station server
• In the User Name – Enter the administrative login name to Monitor Station
• In the Data Port field, enter: 4010
• In the Command Port field, enter: 4012
• Click Save in the Command Toolbar
4. Add the Video Insight sub-controller
• Right-click on the Video Insight controller > Edit > Add Sub-Controller
• Toggle the ‘Poll’ check box if needed

Example This is the new URL to view the VI cameras connected to VI server: 192.168.5.116 is the VI Server in my office. Camera 1 (my office) Video IP Address: 192.168.5.116/VideoInsight4/CameraFrame.aspx?cID=1102208762&dm=3&pu=1  Camera 2 (outside) Video IP Address: 192.168.5.116/VideoInsight4/CameraFrame.aspx?cID=1102208762&dm=3&pu=2  Note: 1102208762 = This is the camera ID that can be found from the Monitor Station>Server Configuration>Record tab