IntroductionThe AEM Bridge device is a hardware device that connects network cameras to Enterprise Manager.
Run the setup wizardThe setup wizard helps you configure your AEM Bridge device. The setup wizard runs automatically when you first turn on the AEM Bridge device, but you can also run the setup wizard at any time.
Overview pageThe Overview page displays information about, and the health of, the AEM Bridge device.
Settings pageThe Settings page displays configuration information and options for the AEM Bridge device.
Log in to an AEM Bridge deviceYou can use a browser to log in to the AEM Bridge Web interface.
ConfigurationConfigure the AEM Bridge device using the Settings page or running the Setup Wizard.
Configure the AEM Bridge deviceYou can configure the AEM Bridge device manually (rather than using the setup wizard) in the AEM Bridge Web interface.
UpdateYou can update both the AEM Bridge firmware and the firmware for cameras attached to the AEM Bridge device.
Update AEM Bridge firmwareYou can update the firmware for the AEM Bridge device using a maintenance settings policy in Enterprise Manager.
Update AEM Bridge firmware manuallyYou can update AEM Bridge firmware on the Settings page in the AEM Bridge Web interface.
Update camera firmwareYou can update the firmware for cameras that are connected to the AEM Bridge device using a camera firmware policy in Enterprise Manager.
Legal informationCopyright © 2018 Aimetis Corp. and/or its Licensor(s). All rights reserved.