Knowledge Base Article
Article Type: Troubleshooting
Product: Symphony
Product Version:
Component:
Device Brands:
Created: 11-Apr-2016 1:04:11 PM
Last Updated:

Client cannot connect to the server remotely

Issue

The Product} Client cannot connect remotely to the [:Product Server. You try to connect to a server using its external IP in your Symphony client. For example, you register a server in your client and explicitly specify port 50000 instead of 50001. 

You receive CryptographicException: Bad Data error.

Cause

You have specified the wrong port when registering the server from the client. Certain ISPs (e.g., Bell with 2Wire, AT&T, and ARRIS modems) use port 50001 for pushing firmware updates to their modems. Since Symphony uses this port and 50000 for connecting to servers there is a port conflict.

Solutions

Make sure you specify BasePort + 1.

Notes: You can change the range of ports Symphony uses. See article Client cannot connect to Server after changing Symphony to a non-standard port OR map another port on your router externally (e.g., 50002) to point to 50001 locally.

Average rating:
Please log in to rate.
Rated by 0, Viewed by 3256