Bosch G Series
Radionics® PC9000 Replacement
Help and Training
Bosch Symphony AC Setup Adding the Bosch G Series inSymphony AC Adding Bosch Credentials in Symphony AC Symphony AC- G Series Training Curriculum
Supported Firmware
- GV3 8.11+ and everything newer
- GV4 v2.xx (Mode 1)
Mode 1 Maximums
D7212GV3
- 4 Areas
- 40 Points
- 27 Outputs
- 63 Skeds
- 100* Users
- 8 Keypads
- 0 Doors
D7412GV3
- 8 Areas
- 75 Points
- 67 Outputs
- 63 Skeds
- 100* Users
- 16 Keypads
- 2 Doors
D9412GV3
- 32 Areas
- 246 Points
- 131 Outputs
- 63 Skeds
- 250* Users
- 16 Keypads
- 8 Doors
D7212GV4
- 4 Areas
- 40 Points
- 27 Outputs
- 63 Skeds
- 100* Users
- 8 Keypads
- 0 Doors
D7412GV4
- 8 Areas
- 75 Points
- 67 Outputs
- 63 Skeds
- 400* Users
- 16 Keypads
- 2 Doors
D9412GV4
- 32 Areas
- 246 Points
- 131 Outputs
- 63 Skeds
- 1000* Users
- 16 Keypads
- 8 Doors
*User 0 is a service passcode. Listed values are effectively 1 through N-1 plus a service passcode. Sub-Users are NOT supported with Mode 1. (e.g. D9412GV4 has users 1-999 plus a service passcode.)
Symphony AC Software Licensing:
Licensing for Symphony AC is based on number of doors. With an Alarm Panel, the licensing is based on the number of readers/doors that the alarm panel can potentially support. The Bosch panels/controllers each support up to 8 readers/doors. Below is a table that can be used to determine which access license would be needed if every reader/door was enabled on the panel/controller:
- 8 Doors = 1 Alarm Panel
- 16 Doors = 2 Alarm Panels
- 32 Doors = 4 Alarm Panels
- 64 Doors = 8 Alarm Panels
- 128 Doors = 16 Alarm Panels
- 256 Doors = 32 Alarm Panels
- 512 Doors = 64 Alarm Panels
- 1024 Doors = 128 Alarm Panels
- 2048 Doors = 256 Alarm Panels