Knowledge Base Article
Article Type: How To
Product: Symphony
Product Version: 7.1
Component: Symphony Server
Device Brands:
Created: 14-Aug-2018 2:12:30 PM
Last Updated:

Integrate a JCI P2000 access control device

You can integrate a JCI P2000 access control device with Symphony to use events from the access control device to trigger alarms.

Supported versions:

  • JCI P2000 v3.14

To integrate the P2000 access control device, complete the following workflow:

  1. Install and configure the P2000 server.
  2. In the P2000 software, create a remote server for the Symphony Server on the System Configuration page (Config > System > Remote Server) with the following information:
    • IP address: IP address of the Symphony Server
    • Port: 50024
    • Protocol: HTTP Post XML Protocol
  3. In the Symphony server configuration interface, add the P2000 access control device and connect to the input sources.

Average rating:
Please log in to rate.
Rated by 0, Viewed by 1703